Westermo MRD-310 Guía de usuario descargar pdf (Pagina 15)

6623-2201

Figure 3

Factory default reset switch

Factory Default Reset Switch

The reset switch is used to restore the configuration of the MRD-310 to factory default

settings. The switch is accessed through a small hole on the rear of the unit adjacent to

the power connector, refer to figure 3.

To reset the configuration:

• Power down the unit.

• Using a suitable tool depress the reset switch.

• Power up the unit ensuring the switch remains depressed for approximately 5 seconds

after power is applied.

• The modem will now re-boot as normal with the factory default settings.

Note: Using the Factory Default Reset Switch will erase all existing configuration

settings and restore the factory default settings. This includes the network

connection profile settings APN, user name and password.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Sin comentarios

Westermo MRD-310 Guía de usuario Pagina 15