Westermo TD-23 Manual de instalación descargar pdf (Pagina 18)

18 6178-2203

&Dn – DTR Option

This command uses the incoming signal DTR to do different things, depending on n.

The value is written to S21 bit 3 and 4.

&D0 DTR drop is interpreted according to the setting as follows: (Default)

If &Q0, &Q5 or &Q6 is set:

DTR is ignored (assumed ON). Allows operation with DTE’s which do not

provide DTR.

If &Q1 or &Q4 is set:

DTR drop causes the modem to hang up.

If &Q2 or &Q3 is set:

DTR drop causes the modem to hang up. Auto-answer goes off.

&D1 DTR drop is interpreted according to the setting as follows:

If &Q0, &Q1, &Q4, &Q5 or &Q6 is set:

DTR drop causes the modem to return to command mode without

disconnecting.

If &Q2 or &Q3 is set:

DTR drop causes the modem to hang up. Auto-answer goes off.

&D2 DTR drop causes the modem to hang up. Auto-answer goes off.

&D3 DTR drop is interpreted according to the setting as follows:

If &Q0, &Q1, &Q4, &Q5 or &Q6 is set:

DTR drop causes the modem to perform a restart as if the Z command

were received.

The parameter &Y determines which profile is loaded.

If &Q2 or &Q3 is set:

DTR drop causes the modem to hang up. Auto-answer goes off.

Please also refer to AT&M, AT&Q, S21

*D – Display Delayed Numbers

This command displays a list with delayed phone numbers together with the delay associated with

each. The modem will return a list with delayed phone numbers according to definition in *B com-

mand.

The example below shows the format of the list (delay times are shown as hours:minutes:seconds).

If no numbers are delayed only the result code OK is issued.

Example:

NO. – PHONE NUMBER -DELAY

1; 8264734660 2:00:00

2; 7532634661 2:00:00

3; 2587334662 0:02:00

4; 7532651663 0:03:25

5; 7459931664 0:01:45

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 55 56

Sin comentarios

Westermo TD-23 Manual de instalación Pagina 18