Westermo TD-23 Manual de instalación descargar pdf (Pagina 28)

28 6179-2203

S25 – Delay To DTR

S25 sets the length of time that the modem will ignore DTR for taking the action specified

by &Dn. Its units are one hundredths of a second for other modes.

Range: 0–255 (0.01 seconds)

Default: 5 (0.05 seconds)

S29 – Flash Dial Modifier Time

S29 sets the length of time, in units of 10 ms, that the modem will go on-hook when it

encounters the flash (!) dial modifier in the dial string. The time can be limited as it is a

country dependent parameter.

Range: 0–255 10 ms intervals

Default: 0 (0 ms) (TD-33/V.90 US Fixed: 70)

S30 – Disconnect Inactivity Timer

S30 sets the length of time, in tens of seconds, that the modem will stay online before dis-

connecting when no data is sent or received. In error-correction mode, any data transmitted

or received will reset the timer. In other modes, any data transmitted will reset the timer.

Range: 0–255 tens of seconds (0–2 550 seconds)

Default: 0 (disabled)

S31 – Bit Mapped Options Status

S31 indicates bit mapped options status.

Bit 0 Single line connect message enable/disable (\Vn)

0 = Messages controlled by S95, Wn and Vn (\V0) (Default)

1 = Single line connect message (\V1)

Bit 1 Auto line speed detection (Nn)

0 = Disabled (N0)

1 = Enabled (N1) (Default)

Bits 2–3 Error correction progress messages (Wn)

0 = DTE speed only (W0)

1 = Full reporting (W1) (Default)

2 = DCE (line) speed only (W2)

Bits 4–5 Not used

0 = (Default)

Bits 6–7 Reserved (Default = 11b)

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Sin comentarios

Westermo TD-23 Manual de instalación Pagina 28