Westermo GDW-11 Guía de usuario descargar pdf (Pagina 20)

6615-2203

DIP-switch settings

DIP-switches under the lid on top of the unit

Before DIP-switch settings:

Warning! Do not open connected unit

Hazardous voltages may occur within this unit

when connected to a power supply.

Warning!

Prevent damage to internal electronics from electro-

static discharges (ESD) by discharging your body to a

grounding point (e.g. use of wrist strap), before the lid

on top of the unit is removed.

To activate DIP-switches Advanced mode needs to be enabled.

NOTE DIP-switch alterations are only effective after a power on or after a software

reset command (AT+CFUN=1).

A setting configured by any other method during normal operation, overrides

the DIP-switch setting. However, at power up, the DIP-switch settings have prec-

edence over the setting configured by any other method.

S1 Status LED indication

1 2 3 4

Status LED not used

LED is OFF

1 2 3 4

Status LED indicates signal

strength, see description of

LED indicators (page 15)

S1 Power on parameter setting

1 2 3 4

Use saved parameter

settings

1 2 3 4

Set factory default at

next power on (AT&F)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Sin comentarios

Westermo GDW-11 Guía de usuario Pagina 20