Westermo GDW-11 Guía de usuario descargar pdf (Pagina 30)

6615-2203

Q – Result code suppression

Syntax:

ATQ<n>

Parameters:

<n>

0: DCE transmits result codes.

1: Result codes are suppressed and not transmitted.

S-registers

S0 – Automatic answer

Syntax:

ATS0=<value>

V – DCE response format

Syntax:

ATV<n>

Parameters:

<n>

0 (Information responses): <text><CR><LF>

0 (Result codes): <numeric code><CR>

1 (Information responses): <CR><LF><text><CR><LF>

1 (Result codes): <CR><LF><verbose code><CR><LF>

+WOPEN – Open AT control command

The modem is by default configured with enhanced mode disabled (AT+WOPEN=0).

The advanced mode is needed to get all functionality to work as stated in Datasheets

and User Guide for GDW-11.

When advanced mode is enabled AT&F will do the following:

S0=2;+WRST=1,”024:00”

After disabling advanced mode some unwanted result codes may appear. To get rid of

these extra result codes the following AT commands must be used:

AT+CREG=0

AT+CGREG=0

AT+WIND=0

AT+CGEREP=0

Syntax:

AT+WOPEN=<Mode>

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

Sin comentarios

Westermo GDW-11 Guía de usuario Pagina 30