Westermo GDW-11 Guía de usuario descargar pdf (Pagina 26)

6615-2203

Configuration

The GDW-11 can be configured from the local DTE interface. When the local interface is

used the configuration can be made with AT-commands on the serial interface, or with a

PC-based application configuration tool. Factory default settings can also be obtained by

using a DIP switch locally.

Standard mode is used for basic GSM modem functionality

Advanced mode adds extended command set and functions. See AT+WOPEN.

Commands that require advanced mode are marked

AT-Commands

The most commonly used commands are listed below.

Please refer to the document “GDW AT-Command Guide” for a complete list of all the

available AT-commands and a detailed description of the serial AT-command interface.

+CLCK – Facility lock (PIN code control)

Syntax:

AT+CLCK = <fac>, <mode>, <password>

Parameters:

<fac>

“SC” PIN code control.

More values for <fac> exists, see +CPWD.

<mode>

0 Disable the facility.

1 Enable the facility.

2 Query status.

+CPIN – Enter PIN code

Syntax:

AT+CPIN = <pincode>

Parameters:

4 to 8 digits.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 39 40

Sin comentarios

Westermo GDW-11 Guía de usuario Pagina 26